Programme Sequence - Miele W 931i Operating Instructions Manual

Programme sequence

Programme sequence
Soak
Pre-wash
Main wash
Top-up rinse
Graduated rinsing
No. of rinses – normal
– part load
– short wash
Rinse & interim spin (rpm)
Final spin (rpm)
Anti-crease spin & loosen
Rinse hold
Without final spin
Wash rhythm
Water level – Wash
– Rinse
Notes:
X programme section available
– Programme section not available
1) A 4th rinse automatically switches in if there is too much foam in the drum, or if a spin speed lower
than 800 rpm has been selected.
2) Increasing the water level:
The water level can be increased from a low level to a higher level by pressing the "Water plus" button
3) Top-up rinse:
Additional water flows into the drum, and the suds are cooled slightly. Hot water might damage plastic
drain pipes.
Graduated rinsing:
The suds are cooled at the end of the wash cycle by water flowing in and being pumped away at inter-
vals. This minimises the danger of creasing, by avoiding sudden temperature changes.
WOOLLENS:
Wool is susceptible to damage from movement when it is wet. Drum movement times during the pro-
gramme are shorter, and the drum rotates more slowly.
20
COTTONS MINIMUM IRON
optional
optional
X
from 75°C
–
1)
3 oder 4
2
2
max. 1000
max. 1550
max. 30 mins max. 30 mins
optional
optional
normal
2)
low
2)
low
DELICATES
optional
optional
X
–
from 50°C from 50°C
3
3
2
max. 500
max. 900 max. 600
max. 30 mins
optional
optional
normal gentle action
2)
low
2)
medium
optional
optional
X
–
3
3
3
–
optional
optional
high
high