Table of Contents
Advertisement
6. Starting the programme
Starting the programme
The programme can be started when
the Start/Stop sensor control is flashing
on and off.
Touch the Start/Stop sensor control.
The door will lock and the programme
will start.
The programme status will appear in
the display.
Status
Time left
Cottons
The washing machine will keep you up-
dated on the programme status and the
time remaining for the programme to
run.
If a delay start period has been selec-
ted, this will count down in the display
until the programme starts.
Energy savings
After 10 minutes, the indicators dim.
The Start/Stop sensor flashes slowly.
To reactivate the indicators:
Touch the Start/Stop sensor (this
does not have any effect on a pro-
gramme that is running).
40
11:02
2:27
h
Main wash
Add laundry
Adding laundry during a pro-
gramme sequence (AddLoad)
Laundry can be added or removed at
any time.
Touch the Add laundry sensor con-
trol.
The following appears in the display:
Please wait
The programme will stop and the door
will unlock.
The following appears in the display:
Status
Add laundry
The door can be opened.
Cottons
Open the door and add or remove
laundry.
Close the door.
Touch the Start/Stop sensor control.
The programme will continue.
Laundry cannot usually be added or re-
moved if:
- The suds temperature is above 55 °C
- The water inside the drum is above a
certain level
11:02
Advertisement
Table of Contents
