Problem Solving Guide - Miele W 931i Operating Instructions Manual

Problem solving guide

Problem solving guide
Repair work to electrical appliances should only be carried out by a suitably
qualified person in accordance with local and national regulations.
Unauthorised repairs could be dangerous.
What to do if . . .
. . . the programme does
not begin:
. . . the "Check water inlet /
outlet" indicator lights are
flashing:
30
Cause . . .
There is no power.
The "ON" indicator light has not
lit up.
There is power and the "ON"
indicator is lit up, but the
programme selector has not
been turned to the "Finish /
Start" position.
The water inlet is blocked.
The "Check water inlet" light is
flashing, but the programme
has run normally.
The water inlet system is
blocked.
The "Check water inlet" light is
flashing, and the "Finish" light is
on in the display sequence, but
the load in the machine has not
been washed.
The water outlet is blocked.
The "Check water outlet" light is
flashing.
The Waterproof-System has
reacted.
The "Check water inlet / outlet"
lights are flashing.
Remedy . . .
Check that:
–
the door is properly closed.
–
the plug is plugged in, and
the socket switch is on.
–
the fuse or circuit breaker
has not tripped.
–
Turn the programme selector
the "Finish / Start" position.
–
Select a programme.
–
The stopcock is not opened
far enough.
–
The inlet hose is kinked.
–
The water pressure is too
low. Call the Service dept.
–
Turn the programme selector
to "Finish / Start".
–
Open the stopcock.
–
Select a programme.
–
Clean the fluff filter and drain
pump.
–
Has the drain pump been
fitted too high? (max, drain
head 1 metre).
Call the Service dept.