Fuses; Aids For Replacing Fuses - Mercedes-Benz CLS500 Operator's Manual

Cls-class
Hide thumbs Also See for CLS500:
Table of Contents

Advertisement

Practical hints

Fuses

Fuses are designed to protect the electri-
cal circuits in your vehicle from a short cir-
cuit. If a fuse is blown, the component(s)
and systems controlled by that fuse will
stop working.
The following aids are available to help you
replace fuses ( page 412):
Fuse chart
Spare fuses
Special fuse extractor
Warning!
Only use fuses approved by Mercedes-Benz
and which have the specified amperage. Us-
ing other fuses may cause an overload and
lead to a fire, or cause damage to electrical
components and/or systems.
412
!
Never attempt to repair or bridge a
blown fuse. Have the cause determined
and remedied by an authorized
Mercedes-Benz Center.
Your vehicle's electrical fuses are located
in various fuse boxes:
In the dashboard on the passenger side
( page 413)
On the left side of the cargo compart-
ment ( page 413)
G
In the engine compartment on the driv-
er's side ( page 414)
i
Only install fuses that have been tested
and approved by Mercedes-Benz and
that have the specified amperage rat-
ing.
Never attempt to repair or bridge a
blown fuse. Have the cause determined
and remedied by an authorized
Mercedes-Benz Center.

Aids for replacing fuses

Fuse chart
The fuse chart is found in the fuse box in
the passenger compartment. The amper-
ages of the fuses are also given there.
Spare fuses
Spare fuses are found in the vehicle tool kit
in the trunk.
Fuse extractor
The fuse extractor is found in the vehicle
tool kit in the trunk.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cls55 amg

Table of Contents