Table of Contents
Advertisement
Practical hints
Replacing bulbs
Side marker lamp bulb
Carefully slide the lamp towards the
front in direction of arrows.
Remove the rear end first.
Turn the bulb socket with the bulb
counterclockwise and remove it.
Pull the bulb out of the bulb socket.
Insert the new bulb into the bulb sock-
et.
Place the bulb socket back into the
lamp and turn it clockwise.
To reinstall the lamp, set the front end
in the bumper and let the rear end en-
gage.
392
Replacing bulbs for rear lamps
Tail lamp unit
The tail lamps are equipped with HiP bulbs.
Warning!
The bulbs in the tail lamps cannot be re-
placed individually. The tail lamp bulbs are
under pressure and could explode during an
attempt to replace them.
If the tail lamps are malfunctioning, have
them exchanged at an authorized
Mercedes-Benz Center.
License plate lamp
G
1 Screw
Turn the exterior lamp switch to
position M ( page 130).
Loosen both screws 1.
Remove the license plate lamp.
Replace the bulb.
Reinstall the license plate lamp.
Retighten screws 1.
Advertisement
Table of Contents
