Power Assistance; Brakes - Mercedes-Benz CLS500 Operator's Manual

Cls-class
Hide thumbs Also See for CLS500:
Table of Contents

Advertisement

Operation
Driving instructions

Power assistance

Warning!
The brake system requires electrical energy
for operation.
A malfunction in the vehicle's power supply
or electrical system may impair brake
system operation and switch it into its emer-
gency operation mode. In such a case, the
red brake warning lamp ( page 338) and
warning messages in the instrument cluster
( page 345) come on while driving. To
brake, the driver must then apply signifi-
cantly greater brake pedal pressure and
depress the pedal much further to obtain
the expected braking effect. If necessary,
apply full pressure to the brake pedal.
Brakes may only be applied to the front
wheels. Stopping distance is increased!
266
If there is a malfunction in the SBC brake
system, we recommend that the vehicle be
G
transported with all wheels off the ground
using flatbed or appropriate wheel lift/dolly
equipment. A tow bar must be used if cir-
cumstances do not permit the use of the
recommended towing methods and the
vehicle requires towing with all four wheels
on the ground. Towing the vehicle with all
four wheels on the ground is only permissi-
ble for distances up to 30 miles (50 km) and
at a speed not to exceed 30 mph (50 km/h).
For more information, refer to "Towing the
vehicle" ( page 408). For more informa-
tion, see "SBC brake system" ( page 84).
With the engine not running, there is no
power assistance for the brake and steering
systems. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the
vehicle.

Brakes

Warning!
After driving in heavy rain for some time
without applying the brakes or through wa-
ter deep enough to wet brake components,
the first braking action may be somewhat
reduced and increased pedal pressure may
be necessary to obtain expected braking ef-
fect. Maintain a safe distance from vehicles
in front.
Resting your foot on the brake pedal will
cause excessive and premature wear of the
brake pads.
It can also result in the brakes overheating,
thereby significantly reducing their effec-
tiveness. It may not be possible to stop the
vehicle in sufficient time to avoid an acci-
dent.
G

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cls55 amg

Table of Contents