Table of Contents
Advertisement
Practical hints
What to do if ...
Display symbol
Display messages
F
Key
still in vehicle
Keyless Go
Check system
Do not
forget key
Remove key
Replace key
364
Possible cause
A SmartKey with KEYLESS-GO* left in the
vehicle was recognized while locking the
vehicle from the outside.
The KEYLESS-GO* system is malfunction-
ing.
This display appears (for a maximum of
60 seconds) if the driver's door is opened
with the engine shut off and no SmartKey
in the starter switch.
This message is only a reminder.
You have forgotten to remove the
SmartKey.
There is no additional code available for
SmartKey or SmartKey with
KEYLESS-GO*.
Possible solution
Take the SmartKey out of the vehicle.
Visit an authorized Mercedes-Benz
Center as soon as possible.
Insert SmartKey in the starter switch.
Take the SmartKey with
KEYLESS-GO* with you when leaving
the vehicle.
Remove the SmartKey from the start-
er switch.
Visit an authorized Mercedes-Benz
Center as soon as possible.
Advertisement
Table of Contents
