Disconnecting The Battery - Mercedes-Benz CLS500 Operator's Manual

Cls-class
Hide thumbs Also See for CLS500:
Table of Contents

Advertisement

Warning!
Do not place metal objects on the battery as
this could result in a short circuit.
Use leak-proof battery only to avoid the risk
of acid burns in the event of an accident.
G
Warning!
The SBC brake system requires electrical
power to operate.
A malfunction in the vehicle's power supply
or electrical system may impair brake sys-
tem operation and switch it into its emer-
gency operation mode. The same applies if
battery is disconnected. To brake, the driver
must then apply significantly greater brake
pedal pressure and depress the pedal much
further to obtain the expected braking ef-
fect. If necessary, apply full pressure to the
brake pedal. Brakes may only be applied to
the front wheels. Stopping distance is in-
creased! Adjust your driving style according-
ly. For more information, refer to "SBC brake
system" ( page 84).

Disconnecting the battery

G
Warning!
With a disconnected battery
you will no longer be able to turn the
SmartKey in the starter switch and
pressing the KEYLESS-GO* start/stop
button on the gear selector lever will
have no effect
the gear selector lever will remain
locked in position P
Depress parking brake firmly or move
gear selector lever to position P.
Turn off all electrical consumers.
Remove SmartKey from starter switch.
Vehicles with KEYLESS-GO*:
Press the start/stop button until
the engine shuts off.
Open the driver's door.
Practical hints
Battery
G
403

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cls55 amg

Table of Contents