Table of Contents
Advertisement
Multicontour features
Seat cushion depth
Adjust the seat cushion depth to the
length of your upper leg using
switch 6.
Backrest contour
Adjust the contour of the backrest to
the desired position using æ or
ç.
Move the backrest support to the bot-
tom by using button 5 or to the center
by using button 4.
Backrest side bolsters
Adjust the side bolsters so that they
provide good lateral support using
switch 2.
Drive-dynamic features
Activating
Press button 1 ( page 122).
The indicator lamp in the button comes
on for five seconds and the following
display appears in the multi-function
display for about five seconds.
i
You can adjust the characteristics of
the Drive-Dynamic seat using the con-
trol system ( page 166).
Controls in detail
Deactivating
Press button 1 ( page 122) again.
The indicator lamp in the button goes
out.
i
When the engine is turned off, the last
cushion setting is retained in memory.
The cushion is automatically adjusted
to this setting when the engine is re-
started.
Seats
123
Advertisement
Table of Contents
