Table of Contents
Advertisement
The most likely cause for a malfunctioning
system is a dirty sensor (located behind
the hood grille), especially at times of snow
and ice or heavy rain. In such a case,
Distronic will switch off, and the message
Distronic
Currently unavailable
See Operator's Manual
appears in the multifunction display.
For cleaning and care of the Distronic sen-
sor, see "Cleaning the Distronic system
sensor" ( page 330).
i
If the message
Distronic
Currently unavailable
See Operator's Manual
disappears during driving and the last
speed stored flashes for approximately
five seconds, the dirt (e.g. slush) has
dissolved; Distronic works again.
Controls in detail
Driving systems
Turns and bends
In turns or bends, Distronic may not detect
a moving vehicle in front, or it may detect
one too soon. This may cause your vehicle
to brake late or unexpectedly.
225
Advertisement
Table of Contents
