Inserting A P2 Card; Removing A P2 Card - Panasonic AJ-PCD30PJ Operating Instructions Manual

Inserting a P2 Card

1
Insert the P2 card into one of the card slots.
Press in the card until the EJECT button
pops up.
<Notes>
Be sure to insert the P2 card horizontally.
Forcing the card in at an angle may
damage it.
Do not remove a P2 card while it is being
accessed or right after insertion.
Otherwise, the card may be damaged.

Removing a P2 Card

1
Flip up the EJECT button in the direction of
the arrow.
2
Press the EJECT button.
The P2 card will slide out far enough to allow
you to remove it.
2
Fold the EJECT button in the direction of the
arrow.
<Note>
Do not use the device with the EJECT button
fully extended.
This may result in the unintentional ejection
of the P2 card or a fault in the EJECT button.
<Notes>
To remove a P2 card on a Macintosh, drag the
P2 card icon to the Trash. Then check that the
icon has disappeared and the access indicator
on the device has turned off before physically
removing the P2 card.
Do not remove a P2 card that is being
accessed. Removing a P2 card during access
may cause the device to malfunction.
9