Becker DTM Operating Manual page 61

Tr…‰vprÃHrˆ
The following information can be called up in the Service
Menu.
• Display of the model number
• Display of the serial number
• - Reset for CDC (if available). For Re-
set, press the multifunction button
• - Display of the current GAL adjustment
• - Display of radio software status
• - Display of radio Bolo status
• - Display of Navi Rom/Lib status
• - Display of Navi Flash status
• - Display of RTC value
130
To set the Service Menu, simultaneously press the button
tion.
.
The individual entries can be selected by pressing the multi-
function buttons
tary control
To exit the Service Menu, press the multifunction button
If a malfunction of the unit should occur, such that the unit is
no longer capable of operation or is defective in some other
way, a restart of the internal unit software (reset) can be trig-
gered via the following button combination:
To trigger a reset, press the multifunction button
tifunction button
me.
After a reset of the unit software, the code number must be en-
tered and the Navigation CD re-inserted.
and the multifunction button 10 during radio opera-
and
.
.
and the
or by turning the right ro-
, mul-
button at the same ti-