Becker DTM Operating Manual page 48

Functions only when
In all operations and wavebands, automatic tracking can be
switched on by pressing and holding the
more than 2 seconds.
To switch on automatic tracking in the TP Menu, repeatedly
press the multifunction button
Functions only when
Activate the TP menu.
Repeatedly press the multifunction button
Using the right rotary control
and press to confirm. After a short delay and without actuati-
on, the selected station is accepted.
.
button for
until appears.
.
.
, select the desired TP station
Repeatedly press the multifunction button
Select with the right rotary control
to confirm. After a short delay and without actuation, the di-
rect programming is deleted.
Quit the TP menu.
After selection of a TP or EON transmitter, the mute function
can be activated by pressing the
Thereafter, only traffic announcements and navigation an-
nouncements will be switched through. By pressing the
button again, the mute function is cancelled.
.
and press
button briefly.
117