Becker DTM Operating Manual page 59

With this function, the flashing of the LED (flashes when unit
is switched off) can be switched on or off.
Call up User Menu. By pressing the multifunction button
select either
The setting is stored automatically.
With this function you can select how you wish to hear navi-
gation announcements.
• - The audio source being listened to is turned off and
the navigation announcements can be heard.
• - The audio source being listened to is lowered.
The navigation announcement is set to the same volume
level as the previously heard audio source but still adjus-
table within a range of +/-6 dB. If the audio source volume
is then changed, the navigation announcement volume is
adjusted accordingly.
• - The audio source being listened to and the
navigation announcements can be set to different levels.
128
(LED On) or (LED Off).
To set, call up User Menu. Using the multifunction button
select from ,
The setting is stored automatically.
This can be used to switch on the CD changer AF connections
if no CD changer is connected. An external unit (Discman,
Walkman, etc.) can then be connected.
To set, call up User Menu. With the multifunction button
select either
The setting is stored automatically.
In CD operation, the multifunction button
pressed to select AUX operation.
and .
or .
must be