Table of Contents
Advertisement
Further information under "Dynamic Route Guidance" on
page 106.
•
Provides options for avoiding bridges, ferries, tunnels or
toll roads
A selection can be made by turning the right rotary
control, and settings can be changed by pressing the
right rotary control
.
Pressing the control for more than 2 seconds accepts all
the settings and exits the menu.
Routes without motorways can only be calculated
within a radius of approximately 200km.
88
It is not mandatory for navigation to store a destinations in the
destination memory. It saves repeated manual entry, if the
destination occurs again at a later date.
In the Route menu, select
the right rotary control
and press to confirm.
A name of your choice consisting of up to 14 characters can
be entered for the specified destination, and is stored auto-
matically in the destination memory by pressing the right ro-
tary control
for more than 2 seconds. See "Destination
Memory" on page 97.
The destination can also be stored by selecting the small
tick
and briefly pressing the right rotary control
Should you not wish to enter a name, press and hold the right
rotary control
for more than 2 seconds and the destination
will be entered in the Destination Memory without a name.
The last destination entered can be filed into any desired po-
sition in the Destination Memory by turning the right rotary
control
. The memory position is confirmed by briefly pres-
sing the right rotary control
A total of 50 destinations can be stored
by turning
.
.
Hide quick links:
Advertisement
Table of Contents
