Line Switch Mode - GReddy Full Auto Timer Instruction Manual

Setup Mode

Line Switch Mode

This feature is used when the count down does not properly operate.
If the engine shuts down when the IG key is turned off with out counting,
follow these instructions.
(1) While in Setup Mode, press
the P+S button to go to Line
Switch mode.
(2) Hold down the T button for 2 sec
to change to Acc.
* Hold down the T button for 2 sec
again to change back to IG
(3) Change the switch on the back
of the head unit to Acc.
* Make sure that both of these
setting matches for proper
operation.
Back of the head unit
IG
26
Default setting is
IG.
Hold down T button
for 2 sec.
Acc