Speedometer Setup Mode - GReddy Full Auto Timer Instruction Manual

Speed Mode

Speedometer Setup Mode

This feature allow the user to set the Turbo Timer speedometer to match
the vehicle's speedometer.
(1)While in Speed Mode, press
the P+S button to go to
Speedometer Setup mode.
(2)Get the vehicle speed up to
40km/h. Press the T button
to set the speed.
(3) When the setup is complete,
40km/h will display.
* To clear the memory, hold down
T button over 5 sec. and repeat
the procedure above.
Important! - Make sure you perform this step with a passengers help.
Have the passenger operate the Turbo Timer while the
driver concentrate on driving safely.
* There is a possibility that the vehicle's speedometer and the actual
vehicle speed.
24
After two cycles
Press T to set