Operation Check
Vehicle Speed Signal Safety Feature Operation Check
Before moving your vehicle, be sure that the area around
your vehicle is clear. If not, you may cause an accident.
(1) Go over check procedure 4.3
"Parking Brake Feature Check"
before continuing.
(2)
Carefully, place the vehicle into gear
and move the vehicle slowly.
Turbo Timer and engine should
then turn off.
This concludes the check
procedures.
If the Turbo Timer did not power up, or these safety features
are not working, please recheck all the wiring connections
and then contact your Authorized GReddy Dealer.
Warning !
11
Turn off the key
switch
During count down,
Place the car in gear
and move the vehicle.
Timer and engine
should trun off.