Parking Brake Safety Feature Operation Check - GReddy Full Auto Timer Instruction Manual

Operation Check

Parking Brake Safety Feature Operation Check

(1)
Engage parking brake.
Manual Transmission: Place into
Neutral
Automatic Transmission: Place
into Park.
Start the engine. Make sure the
Turbo Timer powers up with the
music and display lights operating.
(note: The Turbo Timer may be turned
"Off" if so, press the "POWER" button
once to turn on the unit)
(2)
Press P + S to select to "P-1" or
"P-2" Mode.
(3)
1'00" will show in display.
(4)
First depress the brake pedal, so
that the car does not roll, then turn
the ignition "Off" with the key switch.
(5)
The Turbo Timer will then give a
warning "beep" and display "Sid"
Next the unit should begin the
counting-down mode.
(6)
Reengage the Parking Brake.
Check to see if the "Sid" display
disappears and the unit continues
to count-down.
(7)
Now release the Parking Brake.
the count down should stop and
"OFF" displayed. Then the Timer
and engine should immediately turn
off.
10
P+S
P+S
This shows P-1
selected.
After 2 sec. default
value will display.
Turn off the ignition
switch.
Count down begins.
Pull the Parking brake.
During count down,
release the parking
brake.