Your Direct-Line Console - Lucent Technologies MERLIN LEGEND Release 3.1 Analog Direct-Line Console Operator's Manual

Your Direct-Line Console

-Tones-
Tone
Dial tone (steady)
Busy (slow repeating tone)
Fast busy (fast repeating tone)
Error (alternating high-low tones) You dialed a number or used a feature incorrectly.
Confirmation (double break in
dial tone followed by steady tone)
Callback (5 short beeps)
Call Waiting (1 or 2 beeps)
-Rings-
The table below helps you identify the different types of ringing. You can also personalize ringing at
your telephone or adjust ring timing for the line buttons where calls arrive. Programming Buttons
& Settings, p. 23, tells you how to change the settings. Listed below are your options:
• Personalized Ring. Allows you to give calls ringing at your phone one of eight distinctive rings.
• Abbreviated Ring. When you are on a call and another call arrives at your phone, you can use
this feature to give the second call a short ring.
• Immediate Ring. Calls ring immediately on line buttons set this way.
• Delay Ring. This setting causes calls to ring at your phone after a delay. If your calls are being
covered, this allows time for another person to answer a call before you do.
• No Ring. Calls do not ring (except for returning transferred and Callback calls.) Calls on lines
set for No Ring do not receive coverage (p. 18).
Ring
1 long ring
1 short ring and 1 long ring
2 short rings and 1 long ring
Meaning
You can make a call.
The phone you are calling is busy.
No lines are available.
You used a feature correctly.
This call is receiving Callback treatment
(see p. 17).
You have an inside (1 beep) or an outside
(2 beeps) call waiting (see p. 18).
Meaning
Inside call
Outside call
Outside call transferred to you, returning transferred
call, or returning Callback call (see p. 17)
3