Trailering - Evinrude 100 Operator's Manual

TRAILERING

WARNING
Keep everyone clear of stern area when
raising or lowering the outboard. Personal
injury or death can result from contact with
moving parts of the outboard.
Trailering Bracket
To engage bracket — Tilt the motor fully using
the tilt switch inside the boat or the trailering tilt
switch.
1. Trailering tilt switch
2. Tilt switch inside boat
Pull down the trailering bracket. A detent will hold
the bracket in position. Lower the motor until the
trailering bracket locks into place in the stern brack-
ets.
To disengage bracket — Tilt the motor fully. Re-
turn the trailering bracket to its stowed position.
Lower the motor to its vertical position.
Trailer your boat with the motor in a vertical posi-
tion. If your trailer does not provide adequate road
clearance, the motor can be trailered while tilted by
using the motor's trailering bracket.
IMPORTANT: DO NOT use the tilt support lever
when trailering.
35
Operation -