Evinrude 100 Operator's Manual page 54

Engine Maintenance and Inspection Schedule
Description
Engine to transom mounting hardware, re-torque
(40 ft. lbs.)
Electrical and ignition wires and connections,
inspect
Gearcase lubricant replace
Powerhead synchronization and linkage, inspect
Access EMM information, resolve any service
codes
Fuel filter and oil filter(s) inspection, eliminate
contamination
Gearcase lubricant, inspect fill level and condition
of lube
Fuel and oil filter(s) replace
Propeller shaft splines, inspect and lubricate
Starter pinion shaft, inspect and lubricate 100-175
(2)
models
Exhaust back- pressure nipple, decarbonize
(3)
Spark plugs, replace
Driveshaft splines, inspect and lubricate
Water pump, inspect and replace
(1) Also recommended at 10-Hour Inspection
(2) Do not use light duty penetrating lubricants
(3) Emission-related component
D
Dealer Performed Service
O Operator Performed Service
4 Evinrude anti-corrosion spray or Evinrude "6 in 1" multi-purpose lubricant
5 Ultra-HPF gearcase lubricant
6 Power Trim/Tilt Fluid
Triple-Guard grease
7
8 Evinrude Moly Lube P/N 175356
9 Starter Bendix Lube Only P/N 337016
52
- Maintenance
Engine
Care
Product
5
(3)
7
5
7
9
(3)
8
Frequency
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D