Hold - AT&T MERLIN LEGEND Release 2.0 Single-Line Telephone User Manual

Features

Hold

Use Hold to leave a call temporarily and take a second call or
to use other features (for example, to set up a conference call
or start a transfer).
If you want to put a call on hold and hang up so you can pick
it u later, use Park instead of Hold. (See Park.)
Using Hold
To put a call on hold, press and release the Recall or
1.
Flash button or the switchhook.
You hear a dial tone. You can now dial another call or use a feature.
2.
To return to the call on hold, do one of the following:
If you do not return to the held call, it may ring back at your phone
after a length of time that depends on how your system is set up.
Hold
5-16
Press and release the Recall or Flash button or
the switchhook again.
Hang up, then lift the handset again and dial
#