M.i.b.ii (Mb Intelligent Bios Ii) - ECS IC55H-A Manual

Table of Contents

Advertisement

42
M.I.B. III (MB Intelligent BiosII)
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
Performance Level
DRAM Frequency
Configure DRAM Timing by SPD
Memory Hole
DRAM Command Rate
CPU Over-clocking Func:
DOC Over-clocking Func:
PCIE Over-clocking Func:
Spread Spectrum
Auto Detect DIMM/PCI Clk
Voltage Function
Intel (R) Core (TM) i5 CPU
Ratio Status: Unlocked (Min: 09, Max: 27)
Ratio Actual Value: 27
Current Memory Frequency : 1333MHz
Memory Current Type: 9-24-9-9-10-74-5-4-5-20
CPU Vcore
CPU VTT Voltage
VDIMM
PCH Voltage
Performance Level (Standard)
This item shows the performance level of the components, the options are: Standard
and Enhanced.
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
Configure DRAM Timing by SPD (Auto)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.
Memory Hole (Disabled)
This item allows users to enable or disable memory hole remapping.
DRAM Command Rate (Auto)
This item specifies the rate of the DRAM Command.
CPU Over-clocking Func (Disabled)
This item decides the CPU over-clocking function installed in your system. If the
over-clocking fails, please turn off the system power. And then, hold the PageUp key
(similar to the Clear CMOS function) and turn on the power, the BIOS will recover
the safe default.
M.I.B.III (MB Intelligent BIOS III)
Standard
Auto
Auto
Disabled
Auto
Disabled
Disabled
Disabled
Enabled
Enabled
Disabled
680 @ 3.60GHz
: 1.128 V
: 4.464 V
: 1.500 V
: 1.500 V
: Move
Enter : Select
F10: Save
+/-/: Value
F1:General Help
F9: Optimized Defaults
Using BIOS
Help Item
Options
Disabled
Enabled
ESC: Exit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents