Mb Intelligent Bios Ii) - ECS IC41T-A User Manual

M.I.B. II (MB Intelligent BIOS II)
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Performance Level
DRAM Frequency
Configure DRAM Timing by SPD
CPU Over-clocking Func.:
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Voltage
CPU VTT Voltage
DIMM Voltage
NB Voltage
Intel (R) Core (TM) 2 Quad CPU Q9505 @ 2.83 GHz
Ratio Status: Unlocked (Min: 06, Max: 08.5)
Ratio Actual Value: 8.5
FSB Speed : 1333 MHz
Current Memory Frequency
CPU Current Voltage
NB Vcore
CPU VTT
VDIMM
: Move Enter : Select
F1:General Help
Performance Level (Standard)
This item shows the performance level of the components, the options are: Standard
and Enhanced.
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.
CPU Over-clocking Func. (Disabled)
This item decides the CPU over-clocking function installed in yoursystem. If the
over-clocking fails, please turn off the system power. And then, hold the PageUp key
(similar to the Clear CMOS function) and turn on the power, the BIOS will recover
the safe default.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
M.I.B.II (MB Intelligent BIOS II)
Standard
Auto
Enabled
Disabled
Disabled
Enabled
+0.050V
Enabled
+0.100V
Disabled
+0.150V
Disabled
Disabled
Disabled
1333MHz
1.264 V
1.120 V
1.136 V
1.520 V
F10: Save ESC: Exit
+/-/: Value
F9: Load Default Settings
Using BIOS
39
Help Item
Options