ECS IC55H-A Manual page 49

4. Then the default value of the item "Onboard LAN Boot ROM" changed to
" E n a b l e d ".
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
SATA Configuration
Onboard SATA Mode
Onboard AUDIO Function
Onboard LAN Function
Onboard LAN Boot ROM
Serial Port1 Address
USB Functions
Legacy USB Support
: Move
F1:General Help
5. And the default value of the item "1st Boot Device" changed to "Realtek Boot
Agent" (LAN Boot First) automatically. It is convenient for users to boot from
LAN or handle when there is no disk.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
Thermal Management
TM Status
Limit CPUID MaxVal
Enhanced Halt (C1E)
Intel XD Bit
Intel VT
Intel EIST
Intel (R) HT Technology
Intel (R) TurboMode tech
Quick Power on Self Test
Boot Up Numlock Status
APIC Mode
1st Boot Device
2nd Boot Device
3rd Boot Device
Hard Disk Drive
Boot Other Device
ECS eJIFFY Function
: Move
F1:General Help
Press <Esc> to return to the main menu setting page.
Integrated Peripherals
IDE
Enhanced
Enabled
Enabled
Enabled
3F8/IRQ4
Enabled
Enabled
Enter : Select F10: Save
+/-/: Value
F9: Optimized Defaults
Advanced Setup
Enabled
TM1/TM2
Disabled
Enabled
Disabled
Enabled
Enabled
Enabled
Disabled
Enabled
On
Enabled
Realtek Boot Agent
CD/DVD
Removable Dev.
Press Enter
Yes
Disabled
Enter : Select F10: Save
+/-/: Value
F9: Optimzed Defaults
Using BIOS
Help Item
Options
Disabled
Enabled
ESC: Exit
Help Item
For the processor its CPUID
belows 0F41h.
TM2 only can be enable un-
der below setting.
1. Freq.>=3.6GHz FSB800
2. Freq.>=2.8GHz FSB533
ESC: Exit
45