Integrated Peripherals - ECS IC55H-A Manual

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
SATA Configuration
Onboard SATA Mode
Onboard AUDIO Function
Onboard LAN Function
Onboard LAN Boot ROM
Serial Port1 Address
USB Functions
Legacy USB Support
: Move
F1: General Help
SATA Configuration (IDE)
Use this item to show the Serial ATA Configuration.
Onboard SATA Mode (Enhanced)
Use this item to select the mode of the Serial ATA.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard audio device.
Onboard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB device.
Press <Esc> to return to the main menu setting page.
Integrated Peripherals
IDE
Enhanced
Enabled
Enabled
Disabled
3F8/IRQ4
Enabled
Enabled
Enter : Select
+/-/: Value F10: Save ESC: Exit
F9: Optimized Defaults
Using BIOS
Help Item
Options
IDE
AHCI
Disabled
35