Before You Start; Choice Of 24 Hour Or Am/Pm Display; Setting The Date And Time - Danfoss FP975 User Manual

1.3 Before you start

Open the fl ap on the front of the
clock. Press the RESET (R/S) button
using a non-metallic object (e.g.
pencil/matchstick) until you hear a
click and the red light on the front of
the unit fl ashes once.
GB
This will cancel all manual overrides.
1.4 Choice of 24hr or AM/PM display
Press and hold DAY and NEXT
ON/OFF for 1.5 seconds to toggle
between 24hr clock and AM/PM
display, as required.

1.5 Setting the Date and Time

These settings are made during
manufacture and only need
to be changed in the unlikely
event that the unit has lost the
settings.
Setting the Date
Press and hold PROG for 5
seconds to display year.
Use the + or - buttons to set the
correct year.
Press DAY to display day and
month. Use the + or - buttons to
set the correct month (Jan = 1,
Feb = 2 etc.).
Press DAY to display day and
month. Use the + or - buttons to
set day of month.
Danfoss Heating
7