Programming The Heating In 7 Day Mode - Danfoss FP975 User Manual

1.7.2 Programming the heating in 7 day mode

1. Press PROG until SET CH ON
TIME appears at the top of the
display and MO appears at the
bottom of the display.
Use the + and - buttons to set
the time you want your heating
to fi rst come on in the morning
(Event 1).
2. Press NEXT ON/OFF to move
to Event 2.
Continue programming the
heating ON and OFF times in
this way by using the + and
- buttons to set the time you
want and pressing the NEXT
ON/OFF button to move to the
next setting.
3. Press DAY button once only.
TU will appear at the bottom of
the display.
Continue programming the
rest of the week by pressing:
a) NEXT ON/OFF button to
move to the next setting,
b) + and - buttons to amend
the time,
Danfoss Heating
GB
11