Step 3: Install The Audio Card; Step 4: Install The Joystick Port - Creative Sound Blaster Audigy 2 Platinum eX User Manual

Step 3: Install the
audio card
If the AD_LINK cable is too
long, coil it gently to prevent
damage to the delicate wires
inside.
Step 4: Install the
joystick port
Do not force the audio card
into the slot. Make sure that
gold traces of the card's PCI
connector are aligned with
the PCI bus connector on
the motherboard before you
insert the card into the PCI
expansion slot. If it does not
fit properly, gently remove
.
it and try again
1. Align the audio card with the PCI slot and press
the card gently but firmly into the slot as shown
in Figure 2-3.
2. Secure the Sound Blaster Audigy 2 with a screw.
1. Align the joystick connector bracket next to
the audio card.
2. Mount the bracket securely with the remaining
screw. See Figure 2-4.
PCI
slot
Figure 2-3: Aligning the card against
the slot.
Figure 2-4: Installing the joystick port
Installing Hardware 2-3