Installing Hardware; To Install Your Live! Drive; Removing Front Panel Cover; Step 1: Prepare The System For Hardware Installation - Creative Live! Drive II User Manual

Place your CD-ROM/DVD-ROM
drive above the Live! Drive to
prevent dangling cables from the
front panel blocking access to the
drive tray.
6 Live Drive CT4860/CT4861
To install your Live! Drive, you need to perform the following:

Step 1: Prepare the System for Hardware Installation

Step 2: Insert the Live! Drive into the System

Step 3: Connect to the SB Live! Card

Step 4: (Optional) Install the Digital DIN Metal Bracket (To connect to FPS2000 or DTT2500

speakers)

Step 5: (Optional) Connect to the Digital I/O Card (Only if you have one)

Step 6: Complete the Installation

1. Switch off your system and all peripheral devices.
2. Touch a metal plate on your system to ground yourself
and to discharge any static electricity, and then unplug
the power cord from the wall outlet.
3. Remove the cover from your system.
4. Remove the front panel cover from one unused 5¼"
drive bay.
Front panel cover
Figure 3: Removing front panel cover.