Insufficient Soundfont Cache - Creative Sound Blaster Audigy 2 Platinum eX User Manual

Insufficient
SoundFont
Cache
The trade-off of a smaller
SoundFont file is its lower
sound quality.
*Content in these web sites is controlled by other companies. Creative bears no
responsibility for information or downloads obtained from them. This information is
provided only as a convenience to you.
There is insufficient memory to load SoundFont banks.
This may occur when a SoundFont-compatible MIDI file is loaded or played while
insufficient memory has been allocated to Creative SoundFont Bank Manager.
To have sufficient SoundFont cache memory:
❑ Remove an existing SoundFont bank from the system RAM.
Do the following:
i. Click the Bank button.
The Configure Bank dialog box appears.
ii. Click the Select Bank drop-down button, and select a bank index.
iii. Highlight the bank and click the Remove button.
iv. Click the OK button to finish configuring your banks.
❑ Load smaller SoundFont banks instead; or add more RAM to your system.
Do one of the following:
• In the Configure Bank dialog box of Creative SoundFont Bank Manager,
select a smaller SoundFont bank, if available, from the Select Bank box.
• Increase the system RAM on your computer. For more details, visit the
www.soundblaster.com site for technical help.
Note: The amount of SoundFont cache you can allocate depends on the system RAM
available. Your computer may slow down if the amount of cache allocated is too high.
Troubleshooting and FAQs B-7