Creative Sound Blaster Audigy 2 Platinum eX User Manual page 65

Individual analog recording sources cannot be selected in Creative Surround Mixer.
Five analog recording sources are combined under the selection Analog Mix (Line/
CD/Aux/PC). For more information, see "Individual analog recording sources are
not displayed in Creative Surround Mixer." on page B-2.
To record an individual analog source:
❑ In the Record panel of the Basic tab in Creative Surround Mixer, make sure the
recording source selected is Analog Mix (Line/CD/Aux/PC).
❑ In the Source panel, mute the analog sources that you do not want to record —
by clicking the Speaker button to change it to a button with a red cross sign
on it.
No sound from the speakers.
Check the following:
❑ You have connected your speakers to your audio card's output.
❑ You have selected the correct source in the Source panel of Creative Surround
Mixer.
❑ If both the above conditions have been met and you still do not get any sound,
click the red plus sign above the Volume control and check whether the Digital
Output Only check box is selected. If it is, you are in the Digital Output Only
mode and so must connect to digital speakers to hear the sound from your audio
card. See the section on "Speaker Selection Settings" in Creative Speaker
Setting's online Help for more information.
No audio output when playing digital files such as .WAV, MIDI files or AVI clips.
Check the following:
❑ The speakers' volume control knob, if any, is set at mid-range. Use Creative
Surround Mixer to adjust the volume, if necessary.
Troubleshooting and FAQs B-3