Step 3: Install The Audio Card; Step 4: Install The Joystick - Creative Sound Blaster Audigy 2 Platinum eX User Manual

Step 3: Install the
audio card
Step 4: Install the
joystick connector
1. Align the audio card with the PCI slot and press the card
gently but firmly into the slot as shown in Figure 2-3.
2. Do not force the audio card into the slot. Make sure that the
gold traces of the card's PCI connector are aligned with the
PCI bus connector on the motherboard before you insert the
card into the PCI expansion slot. If it does not fit properly,
gently remove it and try again.
3. Secure the audio card to the computer.
1. Align the joystick connector bracket next to
the audio card.
2. Secure the Joystick bracket with a screw (if necessary).
See Figure 2-4.
Figure 2-3:Aligning the card against the slot.
Figure 2-4: Installing the joystick port
Installing Hardware 2-3
PCI
slot