Hiding Key Labels And Menus; Input Connections - Fluke 19xC User Manual

Fluke 19xC-2x5C
Users Manual

Hiding Key Labels and Menus

You can hide a menu or key label at any time:
Press the CLEAR MENU key to hide any key
label or menu.
To display menus or key labels, press one of the yellow
menu keys, e.g. the
SCOPE
10
key.

Input Connections

Look at the top of the test tool. The test tool has four
signal inputs: two safety BNC jack inputs (red input A and
gray input B) and two safety 4-mm banana jack inputs (red
and black). Use the two BNC jack inputs for scope
measurements, and the two banana jack inputs for meter
measurements.
Isolated input architecture allows independent floating
measurements with each input.
Figure 5. Measurement Connections