Table of Contents
Advertisement
Use of the double zone
Warning! To set double zone on turn
the control knob with the double zone
to the right (do not turn it thought the
stop position).
1. Turn the control knob to the right - to po-
sition "9".
CLOCK FUNCTIONS
Display
1
6
Setting the clock functions
1. Set an oven function and temperature
(necessary only for Duration and End).
2. Push the Selection button again and
again until necessary function indicator
flashes.
Clock function
Time of day
Minute minder
Duration
End
Duration
and End
the same time, if the oven is to be
switched on and off automatically later.
2
3
5
4
Shows the time. To set, change or check the time.
To set a countdown time.
A signal sounds, after the time period is completed.
This function has no effect on the operation of the oven.
To set how long the oven has to be in operation.
To set the switch-off time for an oven function.
can be used at
2. Turn the control knob slowly to symbol
until you feel a slight resistance.
At this time the two cooking zones are on.
3. To set necessary heat setting refer to
"Heat settings".
1
Function Indicators
2
Time display
3
Function Indicators
4
Button " + "
5
Selector Button
6
Button " - "
3. To set the time for Minute minder
Duration
or End
button.
The related function indicator comes on.
When the time period is completed, the
function indicator flashes and an acous-
tic signal sounds for 2 minutes.
With the functions Duration
the oven stops automatically.
4. Push any button to stop the signal.
5. Turn the oven functions control knob
and the temperature control knob to off
position.
Application
In this case first set Duration
End
.
electrolux 7
,
, use " + " or " - "
and End
, then
Advertisement
Table of Contents
