Barco Mxrt Control Panel Settings; Accessing The Barco Tab - Barco E-2320 C (SE System Manual

B MXRT control panel settings
ARCO
This chapter describes how to configure the displays in your B
Display System using the tools available through the Advanced button
on the Settings tab of the Windows Display Control Panel.
Note: If you purchased Barco Medical Displays only and not a
complete B
user manual for the display controller you are using.

Accessing the Barco tab

Note: You must have logged on to Windows using an account
with administrator privileges in order to use the Barco portions
of the Windows Display Control Panel to change any display
settings.
Open the Windows Display Control Panel by one of the two
1.
methods below:
Start > Settings > Control Panel > Display
a)
or
Open the "Display Properties Control Panel" by right
b)
clicking in an empty area on the desktop, then select
Properties.
Click on the Settings tab.
2.
Select the rectangle that represents the Barco Nio display
3.
whose settings you wish to change.
Click on the Advanced button.
4.
Select the Barco tab from the Properties screen.
5.
Using the Barco tab
The Barco tab is divided into three sections. The first section provides
information about the graphics controller and allows access to the
N Display System you will need to refer to the
ARCO IO
B MXRT control panel settings
ARCO
N
ARCO IO
57