What To Do If - AEG COMPETENCE E2190-1 User Information

What to do if ...

Fault
The cooking zones are not
functioning.
The oven will not heat.
The oven light will not
come on.
If you cannot remedy the fault using the measures described
above, please contact your local dealer or local Service Force Cen-
tre.
1
Caution: repairs to the appliance should only be carried out by special-
ised repair technicians. Inappropriate repairs may result in serious injury
to the user.
In the event of damage caused by inappropriate repairs, the guarantee
may not cover the work carried out by an authorised engineer or by
your dealer.
3
Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the
oven door during (or just after) baking or roasting may cause the
glass to steam up.
Possible cause
The relevant cooking zone
is not switched on.
The fuse in the domestic
wiring system (fuse box)
has been tripped.
The oven has not been
switched on.
The correct time has not
been set.
The required settings have
not been made.
The fuse in the domestic
wiring system (fuse box)
has been tripped.
The bulb has blown.
Remedy
Switch on the cooking
zone.
Check the fuse.
Switch the oven on.
Set the correct time.
Check the settings.
Check the fuse.
If the fuses are tripped re-
peatedly, please call a qual-
ified electrician.
Replace the bulb (see Care
and Cleaning).
47