Frequency/Voltage Control - ECS P43T-AD3 Manual

40

Frequency/Voltage Control

This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Manufacturer: Intel
Ratio Actual Value: 8.5
CPU Frequency Setting :
Over-clocking Function.
Auto Detect DIMM/PCI CIK
Spread Spectrum
CPU Voltage
Memory Voltage
NB Voltage
< >
Manufacturer: Intel
This item displays the information of current manufacturer of the CPU installed in
your computer.
Ratio Actual Value: 8.5
This item shows the actual ratio of the CPU installed in your system.
CPU Frequency Setting (333MHz)
This item is used to set the CPU Frequency.
Over-clocking Function. (Disabled)
This item decides the CPU over-clocking function/frequency installed in your sys-
tem. If the over-clocking fails, please turn off the system power. And then, hold the
PageUp key ( similar to the Clear CMOS function) and turn on the power, the BIOS
will recover the safe default.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
CPU Voltage (Normal)
This item allows users to adjust the CPU voltage.
Memory Voltage (1.50V)
This item allows users to adjust the DDR memory voltage.
NB Voltage (1.16V)
This item allows users to adjust the Northbridge voltage.
Press <Esc> to return to the main menu setting page.
Frequency/Voltage Control
333MHz
: Disabled
Enabled
Enabled
Normal
1.50V
1.16V
: Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1: General Help F9: Load Default Settings
Using BIOS
Help Item
Options
Disabled
Enabled