Load Default Settings; Supervisor Password - ECS P43T-AD3 Manual

Load Default Settings

This option opens a dialog box to ask if you are sure to install optimized defaults or
not. You select [OK], and then <Enter>, the Setup Utility loads all default values; or
select [Cancel], and then <Enter>, the Setup Utility does not load default values.

Supervisor Password

This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Supervisor Password
Change Supervisor Password
: Move Enter : Select
< >
F1: General Help
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has
been installed, Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the supervisor password.
Press <Esc> to return to the main menu setting page.
Supervisor Password
: Not Installed
Press Enter Install or Change the
password.
+/-/: Value F10: Save ESC: Exit
F9: Load Default Settings
Using BIOS
41
Help Item