Dram Configuration - DFI LanParty UT NF590 SLI-M2R/G User Manual

3
BIOS Setup

DRAM Configuration

Move the cursor to this field and press <Enter>. The following
screen will appear.
x Bottom Of [31:24] IO Space
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Memory Drive Strength
Memory Timings
DQS Training Control
The options are Skip DQS and Perform DQS.
CKE Based Power Down Mode
The options are Enabled and Disabled.
CKE Based Power Down
The options are Per Channel and Per CS.
Memclock Tri-Stating
The options are Enabled and Disabled.
Memory Hole Remapping
The options are Enabled and Disabled.
106
Phoenix - AwardBIOS CMOS Setup Utility
Memory Drive Strength
Memory Timings
DQS Training Control
CKE Base Power Down Mode
CKE Based Power Down
Memclock Tri-Stating
Memory Hole Remapping
Auto Optimize Bottom IO
: Move Enter: Select
DRAM Configuration
Press Enter
Press Enter
Skip DQS
Enabled
Per Channel
Disabled
Enabled
Enabled
E0
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Refer to the following pages for more
information on these submenus.
Item Help
Menu Level
Drive Strength setting
for DRAM Interface
ESC: Exit F1: General Help
F7: Optimized Defaults