Serial-Ata Controller; Raid Enable - DFI LanParty UT NF590 SLI-M2R/G User Manual

RAID Config

Serial-ATA Controller

RAID Enable

SATA 1 Primary RAID
SATA 1 Secondary RAID
SATA 2 Primary RAID
SATA 2 Secondary RAID
SATA 3 Primary RAID
SATA 3 Secondary RAID
↑↓→←
: Move Enter: Select
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Serial-ATA Controller
This field is used to select the Serial ATA channels you want enabled.
RAID Enable
This field is used to enable or disable the RAID function of the Serial
ATA drives.
SATA 1 Primary RAID and SATA 1 Secondary RAID
These fields are used to enable or disable the RAID function of
SATA 1's primary and/or secondary channel (SATA 1 and SATA 2
on the system board).
SATA 2 Primary RAID and SATA 2 Secondary RAID
These fields are used to enable or disable the RAID function of
SATA 2's primary and/or secondary channel (SATA 3 and SATA 4
on the system board)..
SATA 3 Primary RAID and SATA 3 Secondary RAID
These fields are used to enable or disable the RAID function of
SATA 3's primary and/or secondary channel (SATA 5 and SATA 6
on the system board)..
Phoenix - AwardBIOS CMOS Setup Utility
RAID Config
All Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
BIOS Setup
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
3
103