Synchronizing Esp; Electronic Speed Control; To Activate - Chrysler 300C SRT8 Owner's Manual

wheel slip control is active at vehicle speeds between
approximately 24 mph (40 km/h) and 50 mph (80 km/h).
CAUTION!
If the vehicle is towed with the front axle raised, the
engine must be shut off (key in the ignition switch to
the OFF/LOCK or ACC position). Otherwise the ESP
will immediately be engaged and will apply the rear
wheel brakes.

Synchronizing ESP

The malfunction indicator lamp for the ESP is
combined with the Brake Assist System (BAS).
If the power supply was interrupted (battery
disconnected or discharged), the ESP/BAS
malfunction indicator light may be illuminated with the
engine running. Turn the steering wheel completely to
the left and then to the right. The ESP/BAS malfunction
indicator light should go out.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111

ELECTRONIC SPEED CONTROL

When engaged, this device takes over the accelerator
operation at speeds greater than 25 mph (40 km/h). The
speed control switch consists of a stalk mounted lever
located on the steering column.
Speed Control Lever

To Activate:

Push and release the speed control lever ("ON/OFF")
once and an LED on the lever will illuminate indicating
that the electronic speed control is ON. To turn the
3