Table of Contents
Advertisement
Watching TV
Press POWER
on the TM or on the remote control
unit to turn the
power on.
POWER indicator (Green): The TV is on (After a few seconds
a window
appears with sound)
• The initial setup starts when the %/powers
on for the first time, If the %/has
been turned on before, the E7 Setup will not be invoked See page 19 for
perfo/ming E7 Setup from the Setup menu
Press POWER
on the TV or on the remote control
unit again to turn the
power off.
The %/enters
standby and the image on the screen disappears,
The POWER indicator on the %/turns
off
POWER
_;_%?
(On/Standby)
If you are not going to use this %/for a long period of time, be sure to remove
the AC cord from the AC outlet.
® Weak electric power is still consumed even when the %/is turned off,
When you turn on the TV for the first time, it will
Air/Cable
(Antenna
setting}
automatically
memodze
the broadcasting
channels
Make sure what kind of connection is made with your %/
available
in the region where you live. Perform the
when selecting "Air" or "Cable"
following
steps before you press POWER
on the
3 Press _/_
to select "Air" or "Cable"
remote
control
unit.
Press ENTER to enter the setting
1.
Insert the batteries into the remote control unit (See page 8)
Example
2,
Connect the antenna cable to the %/. (See page 8)
g,
Plug in the AC cord to the AC outlet, (See page 7 )
Language (Language
setting}
Select from among 8 languages: English, French and Spanish
"_ Press &/_'
to select the desired language listed on the
screen, and then press ENTER
ON Search (Channel search}
Channel auto search makes the %/look for all channels
viewable in the set area,
4
When "Air" is selected
in Antenna setting:
Press _1/_ to select "Start", and then press ENTER
TV Location
Select "Home" or "Store" for the location where you plan to
install the %/
2 Press _/_
to select "Home" or "Store"
Pless ENTER to enter the setting
Example
When "Cable" is selected
ill Antenna
setting:
Press _k/T to select "Analog & Digita] Search Start" to
search both analog and digital broadcasts, or to select
"Analog Search Start" to search only analog broadcasts,
and then press ENTER
If you select "Home", AV MODE is set to "STANDARD"
• if you select "Store", AV MODE is set to "DYNAMIC {Fixed)".
In case no remote control signal is received within 80 minutes,
AV MODE will change to "DYNAMIC(Fixed) _'automatical_/
For changir_g the %/Location
after the setting, see "E7
Setup" on page 19
The Channel search will start automatically
• To exit the Channel search screen, select "Cancel", and
then press ENTER
• If no channel is found, confirm the type of connection made
with your %/and try E7 Setup again
(See page 19)
Hide quick links:
Advertisement
Table of Contents
