Turning On/Off the Power
When you turn on the TV for the ﬁ rst time, it will
automatically memorize the broadcasting channels available
in the region where you live. Perform the following steps
before you press POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 9.)
2. Connect the antenna cable to the TV. (See page 9.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
Press a / b to select the desired language listed on
the screen, and then press ENTER.
Select "Home" or "Store" for the location where you plan to
install the TV. This product qualiﬁ es for ENERGY STAR V3.0
in Home mode default setting.
Press a / b to select "Home" or "Store", and then
Home: "Power Saving" is set to "Off", and AV MODE is
set to "STANDARD".
Store: "Power Saving" is set to "Off" and AV MODE is set
to "DYNAMIC (Fixed)". Picture Reset and Feature Demo
can be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is selected,
AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When "On" is selected, after all the settings are
completed, the Feature Demo screen is displayed if there is
no operation for several minutes.
Press POWER on the TV or on the remote control unit to turn the
POWER indicator (Green): The TV is on. (After a few seconds, a window
appears with sound.)
The initial setup starts when the TV powers on for the ﬁ rst time. If the TV has
been turned on before, the initial setup will not be invoked. For changing the
settings of the initial setup, perform EZ setup on the Setup menu on page 19.
Press POWER on the TV or on the remote control unit again to turn the
The TV enters standby and the image on the screen disappears.
The POWER indicator on the TV turns off.
If you are not going to use this TV for a long period of time, be sure to remove
the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is turned off.
ENERGY STAR qualiﬁ cation is based on AV MODE "STANDARD".
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
Press a / b to select "Air" or "Cable", and then
CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewable in the set area.
1 After "Air/Cable" has been set, "CH Search" is
highlighted. Press ENTER.
2 Press a / b to select "Analog & Digital" to search
both analog and digital broadcasts or "Digital"
to search only digital broadcasts or "Analog" to
search only analog broadcasts, and then press
3 Press a / b to select "Yes", and then press
Analog & Digital
The Channel search will start automatically.
If no channel is found, conﬁ rm the type of connection made
with your TV and try EZ Setup again. (See page 19.)
For changing the settings of the initial setup, perform EZ
setup on the Setup menu on page 19.