Download  Print this page

Watching Tv; Turning On/Off The Power; Initial Setup - Sharp LC42D65U Operation Manual

Sharp flat panel television user manual
Hide thumbs

Advertisement

Watching TV

Turning On/Off the Power

Initial Setup

When you turn on the TV for the fi rst time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press TV POWER on the
remote control unit.
1. Insert the batteries into the remote control unit. (See page 8.)
2. Connect the antenna cable to the TV. (See page 8.)
3. Plug in the AC cord to the AC outlet. (See page 7.)
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
1
Press a/b to select the desired language listed on the
screen, and then press ENTER.
Language
TV Location
Air/Cable
CH Search
TV Location
Select "Home" or "Store" for the location where you plan to
install the TV. This product qualifi es for ENERGY STAR V3.0
in Home mode default setting.
2
Press c/d to select "Home" or "Store".
Press ENTER to enter the setting.
Example
Language
TV Location
Air/Cable
CH Search
If you select "Home", AV MODE will be set to "STANDARD".
If you select "Store", you will be able to set Picture Reset
options. In this case, AV MODE will be set to "DYNAMIC
(Fixed)" regardless of whether Picture Reset is "On" or "Off".
When you set Picture Reset to "On", AV MODE will be reset
to "DYNAMIC (Fixed)" if there is no operation for 30 minutes.
When "Off" is selected, AV MODE will be set to "DYNAMIC (Fixed)".
For changing the TV Location after the setting, see "EZ
Setup" on page 23.
ENERGY STAR qualifi cation is based on AV MODE "STANDARD".
14
Press POWER on the TV, or TV POWER on the remote control unit to
turn the power on.
• POWER indicator (Green): The TV is on. (After a few seconds, a window
appears with sound.)
POWER
• The initial setup starts when the TV powers on for the fi rst time. If the TV has
been turned on before, the initial setup will not be invoked. For changing the
settings of the initial setup, perform EZ setup on the Setup menu on page 23.
Press POWER on the TV, or TV POWER on the remote control unit
again to turn the power off.
• The TV enters standby and the image on the screen disappears.
TV POWER
• The POWER indicator on the TV turns off.
(On/Standby)
• If you are not going to use this TV for a long period of time, be sure to remove
the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is turned off.
English
Français
Español
Home
Store
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
3
Press c/d to select "Air" or "Cable".
Press ENTER to enter the setting.
Example
Language
TV Location
Air/Cable
CH Search
CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewable in the set area.
4
When "Air" is selected in Antenna setting:
Press c/d to select "Start", and then press ENTER.
Language
TV Location
Air/Cable
CH Search
When "Cable" is selected in Antenna setting:
Press a/b to select "Analog & Digital Search Start" to
search both analog and digital broadcasts, or to select
"Analog Search Start" to search only analog broadcasts,
and then press ENTER.
Language
TV Location
Air/Cable
CH Search
• The Channel search will start automatically.
• To exit the Channel search screen, select "Cancel", and
then press ENTER.
If no channel is found, confi rm the type of connection made
with your TV and try EZ Setup again.
(See page 23.)
Air
Cable
Start
Cancel
Analog & Digital Search Start
Analog Search Start
Cancel

Hide quick links:

Advertisement

Table of Contents
loading

  Also See for Sharp LC42D65U

  Related Manuals for Sharp LC42D65U