to the back of the televFsion.
(See page 8.)
the AC plug for the television
into the AC
* Place the TV close to the AC outlet, and keep the power
plug within reach
o TO PREVENT
RISK OF ELECTRIC
SHOCK, DO NOT
PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
Place the Ferdte core
in the space
below figure and bundle the cords
the cable clamp
and the cable tee.
Use the remote
u_flt by pointing
sensor on the TV. Objects
unit and the remote
Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an alea with high humidity,
Do not install or place the remote contlol unit under direct
sunlight, The heat may cause deformation of the remote
• The remote control unit may not work ploperly if the remote
contlol sensor on the TV is under direct sunlight or stlong
lighting. In such cases, change the angle of the fighting
or the TV, or operate the remote control unit closer to the
remote control sensor
How to turn on the television for the first time.
A) Press POWER
on the television.
B) The POWER indicator
on the front of the
= Speakers cannot be detached from the TV
cannot be adjusted
The POWER indicator on the television should light GREEN
indicating you have power to the television.
If the POWER indicator on the television still does not light up,
p/ess POWER on the remote control to turn the power on
IF THE UNIT DOES NOT POWER ON
TELEVISION FROM THE OUTLET AND REPEAT THE
IF YOU STILL ENCOUNTER NO POWER PLEASE CONTACT
USAT 1 800 BE SHARP