Table of Contents
Advertisement
Watching TV
Turning On/Off the Power
Press POWER on the TV
or
on the remote control unit to turn the
power on.
• The POWER indicator (Green): The 1V is on.
-
• The initial setup starts when the 1V powers on for the first time. If the 1V has
been turned on before, the initial setup will not be invoked. For changing the
settings of the initial setup, perform EZ setup on the Setup menu on page 20.
Press POWER on the TV
or
on the remote control unit again to turn the
power off.
• The 1V enters standby and the image on the screen disappears.
• The POWER indicator on the 1V turns off.
-
• If you are not going to use this 1V for a long period of time, be sure to remove
the AC cord from the AC outlet.
• Weak electric power is still consumed even when the 1V is turned off.
~--~::---POWER
(On/Standby)
Initial Setup
.
When you turn on the
TV
for the first time, it will
automatically memorize the broadcasting channels available
in the region where you live. Perform the following steps
before you press POWER on the remote control unit.
1.
Insert the batteries into the remote control unit. (See page 9.)
2.
Connect the antenna cable to the 1V. (See page 9.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
language (language setting)
Select from among 3 languages: English. French and Spanish.
1
Press
./~
to select the desired language listed on
the screen, and then press ENTER.
TV location
Select "Home" or "Store" for the location where you plan to
install the 1V. This product qualifies for ENERGY STAR in
Home mode default setting.
2
Press
j,j~
to select "Home" or "Store", and then
press ENTER.
Home: "Power Saving" is set to "Oft", and AV MODE is
set to "STANDARD".
Store: "Power Saving" is set to "Oft" and AV MODE is set
to "DYNAMIC (Fixed)". Picture Reset and Feature Demo
can be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is selected,
AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When "On" is selected, after all the settings are
completed, the Feature Demo screen is displayed if there is
no operation for several minutes.
12
-
• ENERGY STAR qualification is based on AV MODE "STANDARD".
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your 1V
when selecting "Air" or "Cable".
3
Press
~.I~
to select "Air" or "Cable", and then
press ENTER.
CH Search (Channel search)
Channel auto search makes the 1V look for all channels
viewable in the set area.
4
CD
After "Air/Cable" has been set, "CH Search" is
highlighted. Press ENTER.
®
Press
Ji/~
to select "Analog & Digital" to search
both analog and digital broadcasts or "Digital"
to search only digital broadcasts or "Analog" to
search only analog broadcasts, and then press
ENTER.
@
Press
./~
to select "Yes", and then press
ENTER.
• The Channel search will start automatically.
-
• If no channel is found, confirm the type of connection made
with your 1V and try EZ Setup again. (See page 20.)
• For changing the settings of the initial setup, perform EZ
setup on the Setup menu on page 20.
Hide quick links:
Advertisement
Table of Contents
