Brother MFC-J6510DW User Manual page 63

Chapter 4
c
You can change the following fax sending
settings. Press FAX and then press
d or c to scroll through the fax settings.
When the setting you want is displayed,
press it and choose your option.
(Basic User's Guide)
For details changing the following fax
sending settings, see pages 33 to 34.
 Glass ScanSize
 Color Fax Transmission
Preview Outgoing Fax

 Transmission Verification Report
(Setup)
(Advanced User's Guide)
For more advanced fax sending
operations and settings, see Chapter 3
Sending a fax in the Advanced User's
Guide:
 Contrast
 Fax Resolution
 Set New Defaults
Factory Reset

 Duplex fax
 Faxing at End of Call
 Broadcasting
Real Time TX

 Overseas Mode
 Delayed Fax
 Batch TX
 Canceling Waiting Jobs
 Polled Transmit
d
Enter the fax number.
Using the dial pad
Using the Phone Book

Phone Book
Using call history

Outgoing Call

Caller ID hist.
32
Note
• You can preview a fax message before
sending it by setting Preview to On. (See
How to preview an outgoing fax
on page 33.)
• If your network supports the LDAP
protocol you can search for fax numbers
and E-mail addresses on your server.
(See LDAP operation in the Network
User's Guide.)
e
Press Black Start or Color Start.
Faxing from the ADF
 The machine starts scanning and
sending the document.
Faxing from the scanner glass
 If you pressed Black Start, the
machine starts scanning the first
page. Go to step f.
 If you pressed Color Start, the LCD
asks if you want to send a color fax.
Press Yes to confirm. The machine
starts sending the document.
f
When the LCD asks you Next Page?,
do one of the following:
 To send a single page, press No (or
press Black Start again).
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g
Place the next page on the scanner
glass.
Press Black Start.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)