Brother MFC-J6510DW User Manual page 105

Error Message
Ink Absorber NearFull
Ink low
Low Temperature
Media Error
Media is Full.
No Caller ID
No File
No Ink Cartridge
74
Cause
The ink absorber box or flushing box is
nearly full.
One or more of the ink cartridges are
near the end of their life. If one of the
color ink cartridges is near the end of
its life and a sending machine has a
color fax to send, your machine's
"handshake" will ask that the fax be
sent as black & white. If the sending
machine has the ability to convert it,
the color fax will be printed at your
machine as a black & white fax.
The print head is too cold.
The memory card is either corrupted,
improperly formatted, or there is a
problem with the memory card.
The memory card or USB Flash
memory drive you are using has no
available space or already contains
999 files.
There is no incoming call history. You
did not receive calls or you have not
subscribed to the Caller ID service
from your telephone company.
The memory card or USB Flash
memory drive in the media drive does
not contain a .JPG file.
An ink cartridge is not installed
properly.
Action
The ink absorber box or flushing box
will need to be replaced soon. Call
Brother Customer Service or a Brother
Authorized Service Center to have
your machine serviced. (See Brother
numbers on page i.)
Order a new ink cartridge. You can
continue printing until the LCD shows
Cannot Print. (See Ordering
accessories and supplies on page ii
and Replacing the ink cartridges
on page 65.)
Allow the machine to warm up.
Put the card firmly into the slot again to
make sure it is in the correct position.
If the error remains, check the media
drive (slot) of the machine by putting in
another memory card that you know is
working.
Your machine can only save to your
memory card or USB Flash memory
drive if it contains less than 999 files.
Delete unused files to free some
space and try again.
If you want to use the Caller ID feature
call your telephone company. (See
Caller ID in chapter 5 of the Advanced
User's Guide.)
Put the correct memory card or USB
Flash memory drive into the slot again.
Take out the new ink cartridge and re-
install it slowly until it clicks. (See
Replacing the ink cartridges
on page 65.)